Can An Auto Dash Camera Be Used As A Home Security Camera When Run Off A 12 Volt Power Supply?

This is i of the more common questions we receive. There are a number of ways to ability your Nuance Cam depending on your car, how you lot want the installation to look and the features you desire to apply on your Dash Cam.

All Dash Cams mostly come with an included 3 to 4 metre long power cord. I end of the power cord plugs into the Nuance Cam and the other male adaptor end plugs direct into your cigarette lighter socket (nowadays called an "12V accessory socket"). In one case continued this way, the Dash Cams will automatically turn on and off with your ignition. The cigarette/accessory socket in your auto will provide ability when the engine is on, and lose ability when the engine is off.

Notation: 99% of cig/accessory sockets in cars are "switched", which means they only have ability when the engine if on. If your cig/accessory socket is "constant" it will ever accept power and provide information technology to the Dash Cam even when the engine is off. This can cause some hassles because you would accept to unplug or switch off the Dash Cam every fourth dimension you park to prevent your battery from draining. Go along reading for ways around this type of constantly powered socket.

Most Dash Cams will only stay on and record whenever they are plugged in and receive power from the cig lighter socket. Dash Cams practise non have big batteries that can be charged up similar a smartphone. When power is cut to the Nuance Cam from the cig lighter socket (engine off), the Nuance Cam will shut down and then turn on again one time power is resupplied (engine on).

Question 1 – Can I use a different power cord to the one supplied in the box?

Unfortunately non. The manufacturer's supplied power cord is fabricated specifically for your called Dash Cam model. The male adaptor on the included power cord supplies the correct voltage and amps to the Dash Cam. If a different power string is used, information technology could damage your Dash Cam and/or car past supplying different voltages and amps and void your Dash Cam warranty.

Question two – Can I use a USB string to power the Dash Cam?

Unfortunately not. The manufacturer's supplied power cord is made specifically for your chosen Dash Cam model. The male adaptor on the included power cord supplies the right voltage and amps to the Dash Cam. If a USB cord is used, information technology could impairment your Nuance Cam and/or automobile and void your Dash Cam warranty. Some Dash Cams tin exist connected to a computer via a USB cord, however information technology will not power up the Nuance Cam and record. When connecting a Dash Cam to a computer via USB cord, it only allows for file transfer.

Question three – I don't want the Dash Cam power cord male adaptor sticking up out of my cigarette/accessory socket on the console, what tin can I do?

About newer model cars have multiple cigarette/12V accessory sockets. In improver to the socket generally virtually the gear stick, there might be one in the centre panel or the glovebox. Plugging the Dash Cam power string into these areas can hide the adaptor more discreetly. The 4m cable length is more often than not enough to reach either of these areas.

If you don't have multiple cig lighter/accessory sockets but notwithstanding want to costless up the one almost your gear stick, you volition need to visit a qualified auto electrician. They will be able to add in another "switched" female cig lighter/12V accessory socket somewhere else for you lot. Depending on your car, one could be added in your glovebox or passenger footwell areas. Adding another "switched" socket is also a adept idea if your electric current socket is "constant" as discussed above. Just make certain that adding some other female cig socket will non void your new car warranty. As well brand sure that the 4m long Dash Cam power cord will reach your newly installed socket.

If y'all are happy to use your existing socket near your gear stick but need to run multiple devices, you can purchase ane of ourii-way or 3-mode adaptors.

Question 4 – Tin can I hardwire my Nuance Cam directly into the fusebox?

Aye you can but non in a traditional sense. YOU CANNOT CHOP THE MALE ADAPTOR OFF THE SUPPLIED Power CORD AND DIRECTLY WIRE Information technology INTO THE FUSEBOX. This will do 2 things:

1. Impairment your camera completely

2. Void your Dash Cam warranty

Why? All our Dash Cams (nearly in fact) can only have 5V and the correct amps as specified by the manufacturer. The male person adaptor on the manufacturer's power cord houses a fuse which supplies the correct voltage and amps downward to the specific level required for the Dash Cam. If the male person adaptor is chopped off and the blank wires fed direct into the fusebox, the Dash Cam will receive the full 12 volts from the car battery. This will essentially fry the Nuance Cam. Same goes for 24 volt truck batteries.

If yous want to hardwire your Dash Cam y'all can exercise and then via a dedicated Dash Cam hardwire kit.

Question 5 – What is a Dash Cam hardwire kit and what does it do?

Hardwire kits are optional Dash Cam accessories that are more often than not only purchased for Dash Cams with a dedicated Parking Surveillance fashion (click here to read our Parking Mode article).

When installed correctly, a hardwire kit volition provide continuous power to your Nuance Cam, even when the engine is off. Considering the hardwire kit is installed into your fusebox, it draws continuous power from your auto battery and provides it to the Nuance Cam. A hardwire kit is simply required if yous desire to keep recording when your engine is off and your Dash Cam has a parking surveillance mode characteristic.

If you simply want to record while driving when the engine is on, there is no need for a hardwire kit. Simply plug the Nuance Cam power cord into a cig lighter/accessory socket.

At that place are 2 types of hardwire kits.

One type is called a "native" hardwire cable whereby the cablevision runs direct from the Dash Cam and to the fusebox.

The other is a standard hardwire kit (older engineering) which is a minor device consisting of a small-scale module, wires for the fusebox and a female cig lighter attachment. Rather than your Dash Cam ability string plugging into your car cig lighter socket, the Dash Cam power cord plugs into the female cig lighter socket on the hardwire kit (see example below). The low voltage cut off bespeak is set up in the module itself, external to the photographic camera.

The native type hardwire cables do not have a box on them for setting the low voltage cut off point. The depression voltage trigger signal is set up in the camera settings.

Nearly Nuance Cam brands are now moving to native type hardwire cables that are specific to the Dash Cam. This blazon of cable does away with the external control box allowing for a tidier installation.

It is highly recommended that any Nuance Cam hardwire kit be installed past a qualified motorcar electrician with hardwire kit installation feel. The hardwires need to piggyback of particular circuits in the fusebox. You don't desire to exist playing around with essential rubber circuits like your airbags or braking systems.

*Before installing a hardwire kit also check if information technology will void whatever new car warranty. As it is non an original part of the car and is installed into your electric system, it could potentially void a new car warranty. Check with your dealership.

NATIVE Blazon HARDWIRE Cablevision (low voltage cutting off set in camera settings)

STANDARD HARDWIRE KIT SETUP (depression voltage set on external box)

Question 6 – Then if the hardwire kit draws power from my car bombardment to power the Dash Cam, won't it just drain my battery?

if installed and setup correctly, it won't drain your battery to a point where you cannot commencement your automobile. Nuance Cam hardwire kits have low voltage cut off trigger points which you tin set. The hardwire kit monitors the car bombardment voltage and when the chosen cut off voltage has been reached, the hardwire kit will impale power to the Dash Cam .

Question 7 – My cig lighter/accessory has abiding power, even when the engine is off. Practise I still demand a hardwire kit?

Yes. Eventhough your cig lighter socket has abiding power when the engine is off, in that location is cipher monitoring your auto bombardment for low voltage while the Nuance Cam is recording. This could potentially bleed your battery to a signal where you lot have to leap offset information technology. Dash Cam hardwire kits monitor your car battery voltage and cut power to the Dash Cam when the set low voltage betoken has been reached.

Question 8 – Which hardwire kit exercise you sell?

BlackVue Power Magic Pro Hardwire Kit (click hither to view it)

The Power Magic Pro hardwire kit is a more basic and traditional Dash Cam hardwire kit. Information technology has two depression voltage cut off points and timer cut off points also. Settings are controlled past changing dip switches up or down in various combinations.

The Ability Magic Pro is designed for use with BlackVue Nuance Cams notwithstanding most of our other brands like FineVu and Lukas QVIA now apply the native type hardwire cablevision. This means y'all tin purchase the specific hardwire cablevision for these cameras and ready the low voltage cut off in the camera settings.

Question nine – What is the difference between a hardwire kit and a native hardwire cable?

Some Dash Cams, like our FineVU , BlackSys and our Lukas QVIA Dash Cam range have their ain dedicated hardwire cables. You lot don't demand to use the power magic pro. These hardwire cables cannot exist used on other Dash Cams, they are but designed for the specific Dash Cam make. There is no demand for a control box with these hardwire cables because all the voltage and timer cut off settings are cleverly configured in the Nuance Cams settings via smartphone App or manufacturer PC viewer. This allows for a neater installation as yous don't have to mount a command box anywhere in your car. When using these hardwire cables, the Lukas, FineVU and BlackSys Dash Cams are hardwired directly into the fusebox, so yous can do away with the standard cig lighter power string.

Question 10 – I do want a Dash Cam with a Parking Surveillance Mode and I want to hardwire it, what do you recommend?

The following Dash Cam recommendations have the most reliable parking manner features, the selection really comes downwards to additional features yous are looking for and your budget. Here they are:

1. Pair the FineVu LX2000-2CH with the FineVu native hardwire cable

2. Pair the BlackVue DR750S Dash Cams with the Power Magic Pro Hardwire Kit

three. Pair the Lukas QVIA Nuance Cams with the Lukas QVIA Hardwire Cable

You tin compare our most popular parking way Nuance Cams by reading our dedicated blog by clicking hither

Question xi – I practise want a Dash Cam with a Parking Surveillance Manner BUT I don't desire to/tin't use a hardwire information technology, what do you recommend?

If yous don't want to install a hardwire kit into your fusebox or tin't considering of a new automobile warranty, your option is the universal Cellink NEO battery pack. The Cellink NEO has its own power string that plugs into your cig lighter/12V accessory socket and charges up while you lot drive. The Dash Cam power cord connects Cellink NEO and receives ability from the NEO when the engine is off. This is a more expensive option nevertheless installation is DIY and there no need for hardwiring and no apply of your machine bombardment.

Question 12 – I don't want/need to record while I am parked, but I similar the neatness of the hardwire kit, can I still use one?

Yes you lot can. The Ability Magic Pro hardwire kit has a switch on information technology that disables ability to the Dash Cam when the engine is off. When the switch is off, the hardwire kit only supplies ability to the Dash Cam in sync with the ignition.

With the BlackSys CH-300 Dash Cam you tin also however utilise the BlackSys hardwire cable for a neater installation and but turn power off from the camera ON/OFF switch if parking in a secure area.

This is the same for the FineVu LX2000-2CH. If you don't want to record while parked, but turn the photographic camera off at the switch.

With the Lukas QVIA Dash Cams y'all can still utilise the Lukas QVIA hardwire cablevision and merely turn the switch on the camera to ACC. This ways the Lukas QVIA hardwire cable will simply supply power when the engine is ON.

NOTE: If you are considering using a hardwire kit simply for a neater installation and not for parking style recording, it might exist more cost constructive to just have a qualified auto electrician install another female person cig lighter/accessory socket someone subconscious. You can then apply the standard Nuance Cam power string into this socket. Still, having the hardwire kit installed does give yous more than flexibility to use information technology if demand exist.

If you have any further enquiries or would like more than assistance please practise not hesitate to contact us on (03) 9350 2605 or info@dashcamsaustralia.com.au or on our Live Chat tab on the site.

Like this commodity? Read our other articles by clicking here

Source: https://dashcamsaustralia.com.au/powering-dash-cam-options/

Posted by: troyothere.blogspot.com